Graphtec XPF Sequential Segment - Cut marks are not read correctly or cutting shifts occur

Graphtec XPF Sequential Segment - Cut marks are not read correctly or cutting shifts occur

Problem/Question

When using a e.g. Graphtec CE7000 or FC9000 cutting plotter with a Cut Environment based on the “XPF Sequential Segment” driver, you may observe that Cut marks are not read correctly. This can cause misalignment or visible cutting shifts. So you`re wondering, "What can I do?".

Solution/Work-Around

Ergosoft drivers are developed according to the technical specifications provided by the device manufacturer. The recommended approach is to keep all preset technical parameters unchanged. This includes values such as Cut mark distances or line thickness, as the default configuration is generally suitable for standard workflows.
If unexpected problems occur with Cut mark detection or if cutting shifts appear, the following adjustments may help stabilize result
 

    • Related Articles

    • Cut button grayed out / not available

      Problem/Question ContourCut is licensed, but the “Cut” button in the software is grayed out and cannot be used. Solution/Work-Around “Contour Cut” has to be activated Within JobComposer select "View" (top menu) Open "Tools" Check "Cut Environments" ...

    • How to implement Print & Cut Devices

      Problem/Question For Print and Cut devices, usually up to 3 different Cut drivers (Cut after, Using Marks and Cut only) can be selected. "Where can I find the individual Cut drivers and how to add them?" Solution/Work-Around Select the Print ...

    • Cut contour is cut twice

      Problem/Question You are working with EPS or PDF files. These files contain a path that is created in a Spot Color. In JobComposer, you assign this path as a Cut Path in the Job Cut Settings. Although all settings appear to be correct, the plotter ...

    • Spot color is printed even though the Job Cut Settings are set to prevent this

      Problem/Question In some workflows, the option “Do not print this spot color” in Job Cut Settings does not work as expected. Even though the option is enabled, the spot color is still printed instead of being suppressed during printing. ...

    • About the Cut Workspace

      This video explains how to activate the contour cut features in the Ergosfot RIP and how to switch to the dedicated Cut Workspace: https://youtu.be/iNt_AAWBNOk